Application of Aнk-18 Ceramic Flux for Restoration of the Crankshaft of the Ямз Engine

Authors

  • N. Z. Khudаykulov Senior Lecturer of the department “Technological machines and equipment” of Tashkent State Technical University named after Islam Karimov
  • M. M. Payazov Assistant of the department “Technological machines and equipment” of Tashkent State Technical University named after Islam Karimov

Abstract

Restoration of crankshafts of automobile engines of the ЯМЗ type by automatic surfacing with subsequent heat treatment in the conditions of car repair enterprises is difficult to implement due to the lack of powerful installations for hardening necks with high-frequency currents.In addition, crankshafts have reduced fatigue strength and often break during operation, which creates additional difficulties in developing the technology for their recovery.

Downloads

Published

2022-05-19

How to Cite

Khudаykulov N. Z. ., & Payazov, M. M. . (2022). Application of Aнk-18 Ceramic Flux for Restoration of the Crankshaft of the Ямз Engine. International Journal of Innovative Analyses and Emerging Technology, 2(5), 18–21. Retrieved from https://oajournals.net/index.php/ijiaet/article/view/1303

Issue

Vol. 2 No. 5 (2022): May

Section

Articles