Ground of Composition of Cone-Shaped Material Formed for Coverage Working Surfaces of Details

Authors

  • Bobomurod Abdusalomovich Abdumannonov Andijan Institute of Agriculture and Agrotechnology
  • Abrorbek Abbosovich Karimov Andijan Institute of Agriculture and Agrotechnology

Keywords:

Formed tapered composite material, an electric current, a welding layer, composite, polymer, cast iron block, ligurirovannaya steel, abrasive wear

Abstract

This article substantiates the composition of the powder composite material formed to cover the working surface of the parts. According to the results it is advisable to use a powder material containing the iron and nickel alloys as fillers. It was found that the composite particulate material formed on the basis of the chosen composition must izgatovlyatsya industrial method.

Downloads

Published

2022-03-14

How to Cite

Abdumannonov, B. A. ., & Karimov, A. A. . (2022). Ground of Composition of Cone-Shaped Material Formed for Coverage Working Surfaces of Details. International Journal of Innovative Analyses and Emerging Technology, 2(3), 28–30. Retrieved from https://oajournals.net/index.php/ijiaet/article/view/1129

Issue

Vol. 2 No. 3 (2022): March

Section

Articles

Similar Articles

<< < 1 2 3 4 5 6 7 > >> 

You may also start an advanced similarity search for this article.