Gas Thermal and Galvanic Coatings on the Surface of Parts

Authors

  • S. B. Yulchieva Candidate of Technical Sciences, Senior Researcher, SUE "Fan vatarakkiyot", Tashkent state technical university, Republic of Uzbekistan, Tashkent
  • Sh.G‘. Rubidinov Assistant of the Department of Mechanical Engineering and Automation, Fergana polytechnic institute, Fergana, Uzbekistan
  • J. G‘. Gayratov Assistant of the Department of Mechanical Engineering and Automation, Fergana polytechnic institute, Fergana, Uzbekistan
  • Anvar Olimov Student of Fergana polytechnic institute, Republic of Uzbekistan, Fergana
  • Muhammad yusuf Yunusov Student of Fergana polytechnic institute, Republic of Uzbekistan, Fergana

Keywords:

aluminum, titanium, chromium, gas-thermal coatings, galvanic coatings, laser method, chemical-thermal methods

Abstract

This article discusses the use of gas-thermal and galvanic coating methods for restoring the working surfaces of parts, their effect on the surface layer and efficiency.

Downloads

Published

2022-02-16

How to Cite

Yulchieva, S. B., Rubidinov, S. ., Gayratov, J. G., Olimov, A. ., & Yunusov, M. yusuf . (2022). Gas Thermal and Galvanic Coatings on the Surface of Parts. International Journal of Innovative Analyses and Emerging Technology, 2(2), 26–30. Retrieved from https://oajournals.net/index.php/ijiaet/article/view/1016

Issue

Vol. 2 No. 2 (2022): February

Section

Articles

Similar Articles

<< < 3 4 5 6 7 8 9 10 11 12 > >> 

You may also start an advanced similarity search for this article.